Power meter

Power meter PCE-PA6000

Power meter PCE-PA6000

SKU : PCE-PA6000
Category : Power Quality

The PCE-PA6000 power analyzer can be used as a desktop or portable measuring device for measuring active power, apparent power, power factor, energy consumption, alternating voltage, alternating current, direct voltage, direct current, resistance, and frequency. Current/power measurements can be performed with this power analyzer either directly using the included test leads or indirectly using current clamps. The analyzer also offers the option of connecting industrial current transformers with a transformation ratio of 100/5 A or 1000/5 A. The large, easy-to-read 93 x 52 mm LCD display simultaneously shows multiple measurement results, e.g., watts, cos f, ACV, ACA. Using the optionally available PCE-PA-ADP power adapter, loads with a Schuko plug (up to 16 ACA) can be easily and safely connected to the power analyzer for measurement and analysis. The measuring device features an RS-232 data interface, and the analysis software allows you to transfer the data to a PC for further processing and storage. This makes it ideal for use in the workshop or for power measurement and troubleshooting of electrical devices on-site.

Universally usable power analyzer with RS-232 interface and evaluation software for the power analysis of consumers

The PCE-PA6000 power analyzer can be used as a desktop or portable measuring device for measuring active power, apparent power, power factor, energy consumption, alternating voltage, alternating current, direct voltage, direct current, resistance, and frequency. Current/power measurements can be performed with this power analyzer either directly using the included test leads or indirectly using current clamps. The analyzer also offers the option of connecting industrial current transformers with a transformation ratio of 100/5 A or 1000/5 A. The large, easy-to-read 93 x 52 mm LCD display simultaneously shows multiple measurement results, e.g., watts, cos f, ACV, ACA. Using the optionally available PCE-PA-ADP power adapter, loads with a Schuko plug (up to 16 ACA) can be easily and safely connected to the power analyzer for measurement and analysis. The measuring device features an RS-232 data interface, and the analysis software allows you to transfer the data to a PC for further processing and storage. This makes it ideal for use in the workshop or for power measurement and troubleshooting of electrical devices on-site.

  • Automatic range selection
  • Multimeter function
  • Current measurement possible directly and indirectly using a current transformer or current clamp
  • Active power / apparent power measurement
  • Power factor measurement
  • Energy consumption measurement (kWh)
  • Measured value and peak value hold function
  • High / low alarm function
  • RS-232 interface
  • Battery operation and mains operation possible
  • Safety: IEC-1010-1; CAT II 600 V
Function Measuring Range Accuracy Resolution
Active power measurement (AC, real value power), direct measurement 1W ... 6kW ±1.5% + 5 dgt. 1W
Active power measurement (AC, real-value power), via external clamp adapter or current transformer 1W ... 999.9kW ±1.5% + 5 dgt. 1W
Apparent power measurement (AC) 0.01VA ... 9.999kVA ±2% +2 dgt. 0.01VA
Power factor (cos φ) 0.00 ... 1.00 ±1.5% + 2 dgt. 0.01
KWh meter 0.001Wh ... 9999kWh ±1% + 1 dgt. 0.001Wh
ACV / DCV 0.1V ... 600V ±1% + 1 dgt. (101...600V) 0.1/1V
ACAeff/rms / DCAeff/rms direct max. 10 A, with inductive probe max. 1000 A ±1% + 3 dgt. 10 mA, with inductive probe max. 1000 A: 1 A
ACA with forceps up to 2000 A (depending on the pliers) - -
Frequency 10.0 ... 999Hz 1% + 1 dgt. 0.1Hz
Ohm 1Ω ... 19.99kΩ ±1% +1 dgt. 1/10Ω
General Specifications
Display 93 x 52 mm multifunction LCD display
Environmental conditions max. 80% relative humidity / 0 ... +50 °C
Power supply 6 x 1.5 V AA batteries or power adapter
Dimensions (W x H x D) 280 x 210 x 90 mm
Weight 1600 g