Anemometer / warning system
Anemometer warning system PCE-WSAC 50W 230
Radio anemometer warning system / wind monitoring on construction cranes / 4 ... 20 mA analog output / power supply 110 ... 230 V AC
The PCE-WSAC 50W wind warning system is primarily used to measure and monitor wind loads on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before a wind turbine is commissioned. The PCE-WSAC 50W wind warning system is equipped with alarm relays for a pre-alarm and main alarm.
The wind warning system's wide measuring range of up to 50 m/s allows even stormy gusts to be monitored. The wind warning system's wireless range is up to 750 m in open fields using the 2.4 GHz frequency band. When the PCE-WSAC 50W wind warning system's display is installed indoors, a range of up to 60 m to the wind sensor can be achieved. The wind warning system's integrated 4 ... 20 mA analog output allows the measurement data to be transmitted to other control systems for evaluation.
- Robust plastic housing
- Units: km/h, mph, m/s
- 4 ... 20 mA analog output
- 128 x 64 pixel LCD display
- Alarm relay
- Measuring range up to 180 km/h
- Durable stainless steel ball bearings
- Ambient temperature -20 ... +70 °C
- Radio transmission
| Display of the Wind Warning System PCE-WSAC 50W 230 | |
|---|---|
| Entrance | Pulse, analog (4 ... 20 mA) or radio |
| Radio | IEEE 802.15.4 ISM 2.4 GHz |
| Units | km/h, mph, m/s |
| Power supply for sensors | +15 V DC |
| Analog output | 4 ... 20 mA |
| Maximum input impedance | 500 Ω |
| Resolution of the analog output | 10 bits |
| Accuracy of the analog output | ±1.5% |
| Alarm relay | Max. 250 V AC, 8 A |
| Display | Backlit 128 x 64 pixel LCD display |
| Housing | Robust plastic housing |
| Protection class | IP65 |
| Dimensions | 145 x 95 x 125 mm |
| Weight | 650 g |
| Sensor of the Wind Warning System PCE-WSAC 50W | |
| Measuring range | 4 ... 180 km/h |
| Minimum take-off speed | 8 km/h |
| Accuracy | ±1 km/h in the range 4 ... 15 km/h ±3% in the range 16 ... 180 km/h |
| Power supply | Battery monocell D 1.5 V DC |
| Energy consumption | Approx. 0.3 W at 1.5 V DC power supply |
| Housing material | PA + FG |
| Ball bearings | Stainless steel X65Cr13 |
| Bracket | Stainless steel AISI 304 |
| Weight (with standard mount) | Approx. 680 g |
| Weight with self-leveling bracket | Approx. 900 g |
| Dimensions | 320 x 110 x 100 mm |
| Storage temperature | -35 ... +70 °C |
| Ambient temperature | -20 ... +70 °C |
| Protection class | IP65 |
