Water Analysis Meter
Water analysis meter PCE-CP 10
Multi-parameter photometer with Bluetooth interface / PC software / Cloud service / Cross-system synchronization of measured values / Up to 5 selectable parameters / For measuring e.g. pH, alkalinity, chlorine, cyanuric acid / storage of measured values
The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter water analysis meter. With this multi-parameter water analysis meter it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter water analysis meter, a water sample of 10 ml must be placed in a cuvette. The LED built into the multi-parameter water analysis meter generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample
Each measurement is automatically saved by the multi-parameter water analysis meter. The stored measured values can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter water analysis meter. A free app is available to analyze the measured values from the multi-parameter water analysis meter. It is also possible to establish a Bluetooth connection between the multi-parameter water analysis meter and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter water analysis meter, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter water analysis meter is also free of charge.
- Up to 5 selectable parameters
- Bluetooth connection with app
- Exchangeable and lockable cuvette
- 503 nm / 570 nm / 620 nm LED
- Automatic shutdown when inactive
- Many different menu languages
- Light detector: Photodiode
- Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
| Alkalinity | ||
|---|---|---|
| Measuring range | 0… 30 mg/l 30… 60 mg/l 60… 100 mg/l 100… 200 mg/l | |
| Accuracy | 3 mg/l 7 mg/l 12 mg/l 18 mg/l | |
| Resolution | 1 mg/l | |
| Chlorine | ||
| Measuring range | 0.00 ... 2.00 mg/l 2.00 ... 3.00 mg/l 3.00 ... 4.00 mg/l 4.00 ... 8.00 mg/l | |
| Accuracy | 0.10 mg/l 0.23 mg/l 0.75 mg/l 1.00 mg/l | |
| Resolution | 0.01 mg/l | |
| Cyanuric Acid | ||
| Measuring range | 0… 15 mg/l 15… 50 mg/l 50… 120 mg/l 120… 160 mg/l | |
| Accuracy | 1 mg/l 5 mg/l 13 mg/l 19 mg/l | |
| Resolution | 1 mg/l | |
| pH | ||
| Measuring range | 6.50 ... 8.40 pH | |
| Accuracy | 0.11 pH | |
| Resolution | 0.01 pH | |
| Further Specification | ||
| Calibration | Zero point calibration | |
| Light source | 503 nm / 570 nm / 620 nm LED | |
| Light detector | Photodiode | |
| Power supply | 4 x 1.5V AA batteries | |
| Dimensions of the cuvette | 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml) | |
| Menu languages | English, German, French, Spanish and Italian | |
| Storage | Automatic storage of measured values and readout | |
| Storage space | 256 values | |
| Interface | Bluetooth connection with app and PC software | |
| Automatic shutdown | After 300 seconds of inactivity | |
| Operating conditions | 5 … 45°C / 41 ... 113°F, 20 ... 90% RH non-condensing | |
| Storage conditions | 5 … 45°C / 41 ... 113°F, 20 ... 90% RH non-condensing | |
| Dimensions | 165 x 95 x 50 mm / 6.5 x 3.7 x 2 in | |
| Weight | 230 g / < 1 lb | |
